1. Precautions for using Shaanxi electric cylinder

Before applying the electric cylinder, we need to understand that the machine equipment and the motor are a whole, so the motor and the machine equipment can not be separated. Do not disassemble the inner part of the ball screw, otherwise it will cause the inner part of the steel ball to fall down, the installation is more complicated, and it will also harm the linearity of the previous cylinder. In order to improve the coordination of equipment, especially those electric cylinders that are not used for a long time, grease needs to be added on time when applied. When adjusting, it is necessary to carry out at low speed first, and increase the speed after all levels are normal to prevent damage to the electric cylinder.

2. Noise problem

The electric cylinder is a mechanical equipment with a motor, and the mechanical equipment will make a sound during operation, but the degree is different. Some noise is normal, and some may be caused by equipment anomalies.

3. Cause of noise generated by electric cylinder

The parts of the electric cylinder include the ball screw, the ball screw will produce noise in the process of working, and the noise of the electric cylinder and the working speed of the electric cylinder have a great relationship, that is, the faster the working speed of the electric cylinder, the greater the noise will be. When the electric cylinder has a lack of oil inside, it will also produce noise. Under normal circumstances, a good working condition of the electric cylinder will not produce noise, when the electric cylinder produces too much noise may be abnormal internal parts.

4. How to deal with the noise of the electric cylinder

If the noise of the electric cylinder is caused by its excessive speed, this situation can only be reduced by reducing the speed of the electric cylinder to reduce the noise. When the internal lubrication of the electric cylinder is not enough, we only need to make up for the lubricating oil in time. The internal parts of the electric cylinder include ball screw and bearing, the ball screw of the electric cylinder includes tie and grinding, the general grinding screw in the accuracy and noise above are much better than the tie, if there are requirements for the noise of the electric cylinder in the working process, the need to communicate clearly with the electric cylinder manufacturer in advance. The impact of temperature rise on the operation of the electric cylinder on the requirements of the production environment, especially for temperature control. The high temperature of the electric cylinder will affect the operation of the entire equipment.

5. The causes of electric cylinder motor overheating include

(1) The driven load is too large to exclude method: if the servo electric cylinder load changes can not be changed, the motor power and torque should be increased.

(2) The motion friction of the mechanism is eliminated: the mechanical part of the movement is re-adjusted, or the mechanical parts are replaced.

6. When using electric cylinders in summer, pay special attention to the following problems

* The operating environment of the equipment is ventilated and dry, and the appropriate temperature of the operating environment of the entire equipment is controlled. If there are no conditions to control the temperature of the production environment, you can make